Cineped Rotational Slider
(1) Camera slider – 3.5ft rotational
(1) Cineped Quattro/ 4leg
(1) 100mm adapter for fluid head
(1) 150mm adapter for fluid head
(2) Carrying Cases
* Fluid head is not included.
Designed for the times where you just want to do a little 6′ to 8′ dolly move without a lot of setup. The Dana Dolly is easy to set up, can be used with a variety of track options, and can be supported using standard junior stands, apple boxes, or the ground, whatever the shot requires.
Whether you’re an established professional or just getting started, the Dana Dolly is a great solution for adding production value to your shoot. Designed to be flexible, affordable, and easy to set up. Designed by a key grip with over 20 years’ experience in all types of production, the design is both simple and practical. The Mitchell Mount can take all types of camera heads with available adapters. The sixteen- wheel design with floating trucks provides a smooth glide. The track ends and center support can use any 1 1/4″ pipe as a track: aluminum, stainless steel, etc. So if you’re on location and don’t want to pack track, you can stop by a homecenter and pick up some pipe or conduit as an alternative to the Schedule 80 aluminum pipe we recommend for everyday use.
eMotimo Spectrum ST4
If you’re renting a Dana Dolly, Motorize it with the eMotimo spectrum ST4. This kit will get you up and running with a motorized 4-axis system. Shooting with heavy payloads? The spectrum / Dana Dolly integration supports up 15lbs for video moves (more than any of the other sliders we integrate with).
Add your spectrum ST4 to your Dana Dolly in minutes. No drilling or custom tools required. Included quick releases and thumbscrews help to keep things easy. Just plug in 2 cables and a battery to shoot 4 axes.
4 axis Controller (Pan/Tilt/M3/M4). Typically Pan/Tilt/Slide/Focus.
Spectrum Size: 7.4 x 7.3 x 5″ (18.7 x 8.5 x 12.7 cm)
Camera support capacity: 15 lbs (6.8 kg)
Weight spectrum ST4: 4.5 lbs. (2.04 kg)
Weight of Integrated LPlate with Fz Motor: 1.5 lbs (0.45 kg)
Weight of Dana Dolly Integration Kit: 3.25 lbs (1.6 kg)
Power: 10.8 – 25.0VDC. 3.5 Amps or V-Mount Battery
Operation Temperature: -22 to 122°F (-30 to 50°C)
MYT Works 6ft Large Glide Camera Slider
The MYT Works Glide slider dollies are known for smooth motion and perfect starts and stops. High quality machining allows for consistent performance and damage resistance over years of use and extreme wear and tear. Large Glide Sliders have a rail span of 9 inches and handle loads up to 150 lbs. They are suitable for any camera from a DSLR to a fully loaded Arri Alexa and any camera in between, including popular Black Magic, Canon, Panasonic, RED and Sony cameras. Designed by a filmmaker to meet the practical needs of camera operators and grips, Glide sliders have a portable, modular design for numerous quick setups in any shooting environment. Backwards compatibility is a feature of all products, so parts won’t become obsolete with upgrades. MYT Works sliders are designed, manufactured and assembled in New York City from machined, industrial-grade, non-corrosive aluminum and steel. ● Carrying weight 14 lbs ● Portable, ready-to-shoot design ● Hybrid sleeve and wheel bearings for naturally damped motion ● Removable Hi-Hat can be used alone, with Rover Dolly or skater dollies ● Quick release latch moves Hi-Hat to alternative setup in seconds ● Mounts on tripods, junior stands, light/baby/c-stands, 19mm or Speedrail legs, large Mitchell camera dollies, baby feet and various grip alternatives ● All camera mounts available: Flat Mount, 75mm, 100mm, 150mm and Mitchell ● 75mm, 100mm and 150mm mounts designed for adjusting the camera head independently of the slider platform ● Rigid extruded rails eliminate need for center support ● Center-mounting and end cap mounting capability ● Easy maintenance, rust and corrosion resistant ● 3-in-1 purchase option available in all sizes ● Underslung capability
8 Ball Slider
• Precision CNC Milling.
• All Hi-quality 6061 Billet Aluminum.
• Quiet Tracks. So you can record sound.
• Over Travel Magnets.
• 3/8-16 Threaded holes down sides and end caps.
• Very Rigid Design max weight 190lb.
• Rotating pan mount with a smooth pan brake.
• Complete slider is Hard Anodized.
• Rotating pan mount is set on 2 tapered roller bearings and the spindle is made from Billet 1144 stress proof steel.
Modern Studio 3 Foot Slider
• 3 Foot Modern Slider
• 75mm Ball
• 100mm Ball
• 150mm Ball
• 2 Slider Bridgeplates
• Road Case